Automend Pro Reviews, Functions and Price

Everybody knows it: Nowadays, faults in cars are often read out via the car’s OBD II connector. This is done with a special device. The problem: Often garages find a wrong fault and repair things that actually do not require repair. Afterwards, the owner does not only have to pay the costs for these. It will probably two or three weeks later again cause the indicator light of the vehicle to burn. The car has to go to the workshop again. In this way the costs add up. Moreover, it is now well known that some garages make a profit from this. With the Automend Pro, anyone can read out their car’s faults by simply plugging the device into the OBD II connector and reading the fault on their smartphone. We just tried the Automend Pro and wanted to know what it was all about.


What is the Automend Pro?

The Automend Pro is a car reading device that uses the OBD II connector to find out what is wrong with the car. Unfortunately, in garages it is all too often that a fault is read out, but it is wrong. Accordingly, the car is repaired in a place where it is not necessary. At the same time, however, the cost of the repair is so high that it can be financially ruinous if other problems can be found afterwards. The manufacturer of the Automend Pro presented especially the the following characteristics into the foreground:

  • The user will no longer be asked to pay unnecessarily for repairs.
  • As the owner you know exactly what is wrong with your car.
  • The car reader also calculates the costs that will be incurred for a repair.
  • It will never again charge too much or read out an error that does not exist.
  • All in all, the Automend Pro protects the user from the horrendous costs caused by a mechanic fooling him.

Automend Pro

With Automend Pro, every car owner can determine in advance what kind of fault is present. He then takes the car to the workshop and has it first find out what is going on. If the error then differs from that of the auto-reader, you can intervene as the holder and thus avoid paying too much. It could hardly be better!

Button EN


What is the Automend Pro for?

The indicator light in a car usually indicates that there is a fault that the user should have repaired. But why it lights up is usually not indicated. If you then go to the garage with your car, it is read by a specific device that is connected to the OBD II connector. A very simple diagnosis can then be made. The problem: The driver is usually very surprised by the result. Moreover, this is not always true. Some mechanics read out the error, do some repair work and two weeks later the indicator light lights up again. Malicious tongues would like to claim that some garages use this procedure extra to earn a lot of money. With the Automend Pro it is possible to possible without any problems, to do it yourself and find out exactly where the fault lies. With this help you have your own auto-reading device and can intervene in an emergency to tell the workshop where the fault is.


Why do I need the Automend Pro?

The Automend Pro is aimed at many different target groups, which is why these cannot be clearly defined. What should be clear, however, is the fact that the auto-reader for the OBD II connection appeals to everyone who drives a car. Drivers are optimally supported by the device, regardless of age or gender. Automend Pro can help anyone who is having problems with their car and afterwards, whether you are really taught the right mistake in the workshop. Because then you can react and intervene accordingly if the workshop charges you too much. It is also irrelevant whether you have tried another, comparable device before. You should form your own opinion of this device and therefore we recommend that you simply try it out.

Button EN


How is the auto-reader used?

The Automend Pro is characterised by an absolutely uncomplicated handling. Basically only three steps are necessary to find the error. The first step is to plug the Automend Pro into the OBD II connector. Where this is located is stated in the user manual of each car. So it is no problem to find it, if you want to. Afterwards a App on the Smartphone installed. The manufacturer specifies a specific app here. It is irrelevant whether you use an iPhone or a device that uses Android. Both cooperate with the device that is plugged into the OBD II port.

Afterwards, both devices are simply synchronised with each other. This is usually done via Bluetooth. Within the app, a diagnosis can then be carried out, whereupon Automend Pro finally shows what exactly is wrong with the car. Thanks to this information, it is then clear what actually needs to be repaired.

Automend Pro Use


What are the advantages and disadvantages of the auto-reader?

Each gadget has its own advantages and disadvantages, which you should be aware of before buying a gadget. With regard to Automend Pro, we have taken the opportunity to summarise what is important. With this list you can also you might decide better for or against the auto-reader and have a full overview.


  • cooperates with many devices and operating systems
  • elicits a specific message about an error
  • technical monitoring in real time possible
  • even estimates the cost of repair
  • avoids the expenditure of excessive repair costs


  • none known

As you can see, Automend Pro gives you several advantages. You not only get an indication of why the engine’s indicator light is lit, but also how much it could cost to repair the damage. The technical monitoring takes place in real time. You can also connect the device to a wide range of devices. It does not matter whether it is a smartphone or tablet. It is compatible with iOS and Android, without having to worry about it. There are no disadvantages, because with Automend Pro you can keep a good view of things and avoids high workshop costs.

Button EN


General Automend Pro test and quality features

We have tried the Automend Pro ourselves and wanted to know if it really delivers what the manufacturer promises. First we ordered the Automend Pro from the manufacturer. This process was straightforward and was completed within minutes. We were informed by e-mail about the further procedures and received an additional link with the dispatch e-mail. By means of this link we could check where our auto-reading device was at the moment and when we could expect the delivery. After it had arrived at our premises, we immediately tried it out. The connection to the car is uncomplicated. At the same time, the device is connected to the smartphone via Bluetooth, where it is detected by the app, which error is present. The unit immediately ejected whether an error exists and if so, where it is located. We were able to try this out on several cars and received feedback from the auto-reading device each time.

Overall, we were very satisfied with the Automend Pro and believe that it can be a valuable aid in avoiding overpriced costs at the workshop. You know directly what is going on and you can tell the mechanic that it is not right if he wants to suggest something else. You retain full control over a situation. Therefore we rate Automend Pro with a positive judgement.


General Automend Pro experiences and opinions

We did a lot of research and also wanted to know if the Automend Pro had already been tried by other users and what they thought of it. In the process we found out that there are already some experience reports that we can use as a guide. The Automend Pro has already been tried by many users. First and foremost, they found the Automend Pro to be very advantageous because they can finally see for themselves what is going on with their car. At the same time, they could be sure that it was really the problem in question that the device was outputting.

They no longer had to be subject to the mechanic’s judgment and were often able to assess the situation correctly. Many users were thus perfectly protected from horrendous costs. They would also recommend and buy it again at any time. It did not play any role at all, whether someone had the technical know-how to do it. The users simply got clarity about what was wrong with their car and were therefore very satisfied. We could not find any negative reports. More customer reviews can be by clicking this link! *


Are there any known Automend Pro problems?

During our test as well as while reading the customers’ opinions we could not find any problems or risks related to the Automend Pro. Therefore we can clearly answer this question in the negative and prove that there are no problems.


Where can I buy Automend Pro?

Automend Pro is best purchased directly from the manufacturer. They have their own website and provide a shop where they sell their products. A very big advantage of using this shop is that you can use offer formats. These are staggered in such a way that there are several of the car reading devices in it, so that you always have one at hand. Another advantage of these offers is that you not only get several devices, but also even cheaper. This is because the offers are structured in such a way that each individual device costs less than when ordered individually. So it’s worth taking advantage of them when you have the opportunity. However, you should always be quick. Because the offers are only limited in time and it is not quite clear whether they will ever come back. Therefore we recommend that you take advantage of the offers in any case.

Automend Pro En

Automend Pro Technical Details

Regarding the technical characteristics, the manufacturer has unfortunately kept a low profile. We can therefore not list any further details that would help to learn more about the technology of the Automend Pro.


How does the order process work?

Ordering Automend Pro is completely trouble-free. Simply use the order form provided on the supplier’s website. Here you can enter different data and then select the same order for which payment method you choose. Possibilities like Paypal and credit card are available. This has the advantage that the order can be made as secure as possible. Afterwards the order is already sent.

The customer receives a clear e-mail with all data in it, so that he can check it again. If the Automend Pro is sent, you will receive another e-mail. In this e-mail there is a link to the shipment. With this link it is possible to track the parcel and see exactly where it is at the moment. So you always have a complete overview after the order and can check when it arrives. It could hardly be better. Once it has arrived, you can try out the auto-reading device directly.


Automend Pro Evaluation and recommendation

Overall we are very positive about the Automend Pro. Because in some situations it has already been able to explain to us where exactly the fault of a car lies and how much it will cost you. By means of the OBD II connection it is very easy to connect in the car and can cooperate with many devices. It is a great help to every car owner, because higher costs are categorically avoided. We are therefore very happy to recommend it to others and give it a positive rating!



In this section we clarify what else you should know about the Automend Pro Auto-reader.

  • Can the auto-reader really be operated by anyone? – Yes, without any problems!
  • Where can I find the OBD II connection? – Just look into the car’s operating instructions.
  • Will I never have to expect too much repair costs again? – No! The auto-reading device determines them in advance and you know exactly what you are getting into.


Information about the supplier or shipping partner

The auto-reader is distributed by a supplier with the following address: Anthony Perez, Quality Performance Limited, 377 Valley Rd # 1123, Clifton, NJ 07013 There is also an e-mail address to which you can send any questions. It is Unfortunately we were unable to find out more about the supplier of the Automend Pro.

Automend Pro Logo


List of sources and further links:

Automend Pro

Technical Details 8.0
Usage 7.5
Price 7.5